Hello this is Mic club member.
Brad asked for a brief synopsis regarding the 90mm F16 I built. Here you go.
Its a Starmax kit.
I used WarBird retracts for mains
With an Apprentice style main LG strut cut at angle for the wheel axles
I use elevon mixing: left aileron and elevator y-connected on ch1. And, right aileron and elevator y- connected to ch2
by Allan Flowers The REAR FUSELAGE:Because of the unique power system, the rear fuselage must be supported on the central tube that […]
Maybe some of you have seen my smaller version of this plane flying at our field. This one is really worth watching:
by Allan Flowers Early CAD models, Etc.There are multiblade propellers available in the size needed (e-Calc) but the hub would need drilled […]
You are probably not like me. You can probably land one of these T-28’s without buggering up the nose gear. I re-glued […]
