Great Videos for Jauary

Video: U-2 Carrier Ops
TAILHOOK DRAGON LADY. Thanks Gary F.

http://defensetech.org/2011/12/06/video-u-2-carrier-ops/#more-15590

Subject: HOW TO BUILD AN AIRLINER Thanks Craig H.

The process used for the paint job is amazing.

Click here: Boeing

Quadrocopter Sent in by Craig. H

A RC quadrocopter is an aircraft that is lifted and propelled by four rotors. Unlike most helicopters, quadrotors use fixed-pitch blades, whose rotor pitch does not vary as the blades rotate; control of vehicle motion is achieved by varying the relative speed of each rotor.
100 MPH – This thing should be classified as a lethal weapon.

http://www.flixxy.com/coolest-rc-quadrocopter.htm

Really Cool!!!! From Jack H.

For those who don’t know, Torrey Pines is a state park and launch site for paragliders in San Diego , California . Occasionally these paragliders bring along some special friends.This is a cool video! Before video starts, be sure to go to the bottom right of window and click on “Watch Full Screen Icon”.

http://www.parahawkusa.com/Home.html

These last three are from Otto D.

Thought you’d enjoy the latest $8 creation (less electronics). The plane weighs 3.5 pounds with 7 pounds of thrust and just over 11 sqft of wing.

http://www.youtube.com/watch?v=RxCLYmYEqpk

Build Thread: http://www.rcgroups.com/forums/showthread.php?t=1554284

Hi all. Thought you might enjoy my high powered Green Lantern Flyguy. Enjoy.

http://www.youtube.com/watch?v=inPbL92mcWY

Video to enjoy. Flyguy 62″.

http://www.youtube.com/watch?v=o3SbK9vlP1Q

Build Thread: http://www.rcgroups.com/forums/showthread.php?t=1578106

Flyguy 31″

Flyguy 31

http://www.youtube.com/watch?v=L7eStLuDm5s

Build Thread: http://www.rcgroups.com/forums/showthread.php?t=1580177

Published November 16, 2017

Brad’s Corner for Nov/Dec 2017

To begin, I would like to mention that we are moving this month’s meeting/board member voting from our usual fourth Saturday to Saturday the 18th to avoid conflict with Thanksgiving holiday travel. We will have the meeting/voting around noon with pizza provided by the club for attendees. Jim has sent out absentee ballots for those that cannot attend, please ensure that if you do vote absentee – you fill in your full name as it appears on your membership card. If we can’t verify that you are a member, your ballot will not be counted. No cemetery voters please…
Finally, it has cooled off a bit! It is crazy that we had to wait until November to get a break this year. Still waiting for some rain to smooth the field out and reduce the risk of fire at our site. We really haven’t had many fires this year, and I want to thank all of you for being careful and having your extinguishers ready as needed.
Jim and Dennis have started replacing the worst of the tables at the main runway. Please throw them a thank you for giving up a few flying days to work for us instead. They started with the worst four and will continue into next year as the existing tables give out. Not bad, we have nearly 4 years on tables we expected to last one.
A reminder on etiquette at the field, safety concerns, and just plain common sense: In the last 2 weeks I have observed folks walking out past the fence without letting other pilots know they were stepping out. Please call loudly, there were a few VERY near misses! Also, please look and verify no one is on approach before loudly announcing take-off and landing. Also judge the point at which you call your landings, calling too early can leave others stranded with low batteries waiting for a landing that should have been called thirty seconds later. Finally, after landing, if you taxi – please do so near the fence to reduce risk of others coming in after you.
One of our club members, Butch Bucciarelli, heard my call in September that we were looking for a venue to have our Holiday banquet in Jan. He came through for us in a big way, and our Banquet Committee ( Randy and Quan ) are finalizing the details. It sounds AMAZING! Plan for a blast to all 2017 members to come out in early December with all of the info. Details will not make the web page or be posted to Facebook ( Pictures will post AFTER the event) to avoid the party crashers/freeloaders as we experienced the last 2 years. If you are a member, and do not get the club e-mails, email your friendly editor and he will make sure you get yours: editor@sefsd.org

As I look over the newsletter for the last few months, I notice a great amount of content provided by members. Thank all of you that have hopped on board! Steve Belknap has been doing a great job of putting it all together for us, and it makes his life a bit easier if he does not have to search for all of the content himself. If you have a neat project, please share!
The Board has voted on and approved a small increase in membership dues starting 2018. Dues will go up to $50.00 a year when we start accepting 2018 applications next month. The club costs have been going up over the last few years and this will allow us to keep even. One exciting thing you will see next year is a new style of badge we will be issuing to take some of the load from the membership coordinator – THANKS GEORGE SULLIVAN! We failed to realize how much of a load we had put on Isabel as we took the club from two hundred to four hundred members. Thanks again to Paul and Isabel Guidice for the service to the club for the last seven years.
Please join us on Saturday for the meeting and vote. If you want to give back to the hobby you enjoy, I greatly encourage each of you to spend a bit of time on the board so we can all benefit from your ideas and experiences.
Have a great Thanksgiving, and please be safe. I think I saw a video on YouTube of Skip trying to deep fry a turkey. It was scary! I will be having ham now…
Brad